What to do if Philips HTL3325 Speaker System subwoofer is idle?
If the subwoofer of your Philips Speaker System is idle or its indicator light is off, unplug the power cord from the mains socket. Wait 3 minutes, then plug it back in to reset the subwoofer.
Why is there no sound coming from my Philips HTL3325 Speaker System?
If your Philips Speaker System has no sound, try these steps: First, increase the volume using the Volume Up button on the remote or the soundbar. Also, make sure the soundbar isn't muted by pressing the MUTE button on the remote. Select different input sources using the source buttons. If you're using a digital input, set your TV output to PCM or connect directly to your Blu-ray player, as some TVs don't pass through digital audio. Check that your TV audio output is set to FIXED or STANDARD, not VARIABLE. If using Bluetooth, ensure the volume on your device is up and it's not muted.
How to troubleshoot no power on Philips HTL3325 Speaker System?
If your Philips Speaker System has no power, ensure the AC cord is properly connected to both the speaker and the power outlet. Confirm that the AC outlet has power. Then, press the standby button on the remote control or the soundbar to turn the soundbar on.
What to do if the Philips HTL3325 remote control does not work?
If the remote control for your Philips Speaker System isn't working, first select the correct source before pressing any buttons. Try reducing the distance between the remote and the unit, and make sure you're aiming the remote directly at the sensor on the front of the unit. Check that the battery is inserted correctly, with the polarities (+/-) aligned as indicated. If not, replace the battery.
Why can't I find the Bluetooth name of my Philips Speaker System on my device?
If you can't find the Bluetooth name of your Philips Speaker System on your Bluetooth device, make sure that the Bluetooth function is activated on your device. If it is, try re-pairing the unit with your Bluetooth device.
Why does my Philips Speaker System turn off after 15 minutes?
If your Philips Speaker System turns off automatically after 15 minutes, this is likely due to a low external input signal level. Increase the volume level of your external device to prevent this.
General| Audio decoders | Dolby Digital |
|---|---|
| RMS rated power | 300 W |
| Audio output channels | 3.1 channels |
| Audio Return Channel (ARC) | Yes |
| Tweeter diameter | 52 mm |
| Soundbar speaker RMS power | 200 W |
| Full-range driver diameter (imperial) | 2 \ |
| Wi-Fi | No |
| HDMI version | 1.4 |
| Connectivity technology | Wired & Wireless |
| Digital audio coaxial in | - |
| Power source | AC |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | 0.5 W |
| Subwoofer power consumption | 25 W |
| Product color | Silver |
| Bluetooth range | 10 m |
| Subwoofer type | Active subwoofer |
| Subwoofer location | Separate |
| Subwoofer connectivity | Wireless |
| Woofer diameter (subwoofer) | 6.5 \ |
| Package depth | 180 mm |
| Package width | 1015 mm |
| Package height | 440 mm |
| Package weight | 7700 g |
Weight and Dimensions| Depth | 81.7 mm |
|---|---|
| Width | 950 mm |
| Height | 67.3 mm |
| Soundbar weight | - g |
| Subwoofer depth | 310 mm |
| Subwoofer width | 150 mm |
| Subwoofer height | 412 mm |
Provides online and contact support details for product assistance.
Important safety instructions related to electric shock, fire, and injury prevention.
Precautions to prevent short circuits or fires, including power voltage checks.
Warnings about product injury and damage, including wall mounting safety.
Guidelines to prevent overheating and warnings about battery handling to prevent contamination.
Critical warnings regarding battery ingestion and safe handling practices.
Use only microfiber cloth to clean the product.
Information on recycling and proper disposal of the product and batteries according to directives.
FCC and IC compliance statements for users in the USA and Canada regarding radio frequency emissions.
Declaration of Conformity with EU radio interference requirements, including a link to the official declaration.
Overview of the main unit's components, indicators, and controls.
Details about the wireless subwoofer, including its power socket, pairing button, and indicator.
Overview of the remote control's buttons and their functions.
Identifies and describes the various input/output connectors on the Soundbar.
Instructions for the first-time use and replacement of the remote control battery.
Warnings and precautions for handling and storing batteries to prevent leaks or explosions.
Important notes on HDMI ARC setup, including TV support and cable requirements.
Step-by-step guide to connect the Soundbar to a TV or device via the optical socket.
Instructions for connecting the Soundbar to a TV using the HDMI ARC socket for audio return.
How to connect the Soundbar to a TV or device using the AUX (3.5mm) audio cable.
Instructions for connecting the Soundbar and subwoofer to the power supply, with safety warnings.
Details on automatic and manual pairing procedures for the subwoofer with the Soundbar.
Steps to manually pair the subwoofer if automatic pairing fails, including tips for troubleshooting.
How to select different audio input modes (Aux, Optical, HDMI ARC, BT, USB) using buttons.
Instructions on how to power the Soundbar on, off, and into standby mode.
Explanation of the auto standby feature and how to disable it for energy saving.
How to select preset sound modes (Movie, Music, News) using the EQ button.
How to increase, decrease, and mute the volume using the remote control or unit buttons.
Detailed steps for connecting and playing audio from a Bluetooth-enabled device.
How to operate the Soundbar when connected via AUX, Optical, or HDMI ARC inputs.
Troubleshooting tip for no sound in Optical/HDMI ARC mode, suggesting PCM or Dolby Digital output.
Instructions on how to play audio files from a USB storage device.
Important notes and warnings regarding safe and proper wall mounting procedures.
Guidance on selecting appropriate screws for wall mounting the Soundbar.
Technical specifications for the Bluetooth connectivity, including profiles and frequency.
Detailed technical specifications for the main Soundbar unit, including power and dimensions.
Technical specifications for the subwoofer, including power, frequency response, and dimensions.
Technical specifications for the remote control, including range and battery type.
Lists the audio formats supported by the Soundbar for different connection types.
A warning against removing the product casing to prevent electric shock and maintain warranty.
Steps to troubleshoot issues related to the Soundbar not powering on.
Solutions for troubleshooting sound issues, including volume, mute, source selection, and digital input settings.
Troubleshooting tips for when the remote control is not functioning correctly.
Steps to resolve issues with finding the Soundbar's Bluetooth name on a mobile device.
Explanation of the 15-minute auto power-off function for energy saving.
Instructions to reset the subwoofer if it is idle or its indicator light is off.
To Next Page
