Philips HTL3325 User Manual

12
4 Use your
Soundbar
This section helps you use the Soundbar to play
audio from connected devices.
Before you start
• Make the necessary connections described
in the quick start guide and the user
manual.
• Switch the Soundbar to the correct source
for other devices.
Turn ON and OFF
• When you rst connect the unit to the
main socket, the unit will be in STANDBY
mode. The Standby indicator will light up.
• Press the
button on the remote control
to switch the main unit ON or OFF.
• Disconnect the main plug from the main
socket if you want to switch the unit off
completely.
• If a TV or an external device (Only for
AUX socket) is connected, the unit will
switch on automatically when the TV or
the external device is switched on.
Auto Standby
The unit automatically turns to Standby mode
after about 15 minutes if the TV or the external
unit is disconnected, switched off.
• To switch the unit off completely, remove
the mains plug from the mains socket.
• Please turn the unit off completely to save
energy when not in use.
Select Modes
1
Press the Source button repeatedly on
the unit or press the Aux, Optical, HDMI
ARC, BT/Pair, USB buttons on the remote
control to select the desired mode.
» The indicator light on the Soundbar will
show which mode is currently in use.
• Aux / USB: When lit, shows that the
Soundbar in the Aux mode. When
ash, shows that the Soundbar in the
USB mode.
• BT: When lit, shows that the Soundbar
in the Bluetooth mode.
• Optical: When lit, shows that the
Soundbar in the optical mode.
• HDMI (ARC): When lit, shows that the
Soundbar in the HDMI ARC mode.
Select Equalizer (EQ) Effect
Select predened sound modes to suit your
video or music.
1 Press the EQ button on the remote
control to select your desired preset
equalizer effects.
» All LEDs lights up for 0.5 sec to
indicate entering EQ selection menu.
» Light up LEDs for 3 sec to show
current EQ mode according to the EQ
mode denition.
•
(Movie)
recommended for viewing Movies
••
(Music)
recommended for listening to Music
•••
(News)
recommended for listening to News
» Press the EQ button to switch among
the modes.
Downloaded from www.vandenborre.be

Philips HTL3325 Specifications

General

Audio decoders	Dolby Digital
RMS rated power	300 W
Audio output channels	3.1 channels
Audio Return Channel (ARC)	Yes
Tweeter diameter	52 mm
Soundbar speaker RMS power	200 W
Full-range driver diameter (imperial)	2 \
Wi-Fi	No
HDMI version	1.4
Connectivity technology	Wired & Wireless
Digital audio coaxial in	-
Power source	AC
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.5 W
Subwoofer power consumption	25 W
Product color	Silver
Bluetooth range	10 m
Subwoofer type	Active subwoofer
Subwoofer location	Separate
Subwoofer connectivity	Wireless
Woofer diameter (subwoofer)	6.5 \
Package depth	180 mm
Package width	1015 mm
Package height	440 mm
Package weight	7700 g

Weight and Dimensions

Depth	81.7 mm
Width	950 mm
Height	67.3 mm
Soundbar weight	- g
Subwoofer depth	310 mm
Subwoofer width	150 mm
Subwoofer height	412 mm