Philips HTL5160B - Remote Control

5EN
White LED
• Lights up when this product is
connected to the network.
• Lights up when this product is in
networked standby (connected to the
network).
• Blinks when this product is connecting
to the network.
Orange LED
• Lights up when software update is
detected.
• Blinks when software update fails.
e Display panel
f NFC tag
Tap the NFC-enabled device on the tag for
Bluetooth connection.
Remote control
This section includes an overview of the
remote control.
a (Standby-On)
• Switch this product on.
• Switch this product to ECO standby
when this product is not connected to
the network.
• Switch this product to networked
standby when this product is
connected to the network.
• When EasyLink is enabled, press
and hold for at least three seconds
to switch all connected HDMI CEC
compliant devices to standby.
b
a
c
d
f
h
i
j
k
e
g
l