Philips HU4803 - Manual; Sleep Mode; Set the Timer

7
EN
English
Sleep mode
In sleep mode, the humidier operates
quietly with dimmed light for your
undisturbed sleep.
1 Press the speed button once or
more times to select sleep mode
(g. i). In sleep mode, only the
speed
light is on.
2 To change to another fan speed,
simply press the speed button
again.
Note
• Sleep mode only works at speed .
• In sleep mode, the red indicator does
not blink, but remains on when the
water level gets low.
• In sleep mode, you can only set the
timer; the humidity level cannot be set,
and the humidity light is o.
Set the timer
With the timer function, you can let the
humidier operate for a set number of
hours. When the set time has elapsed,
the humidier automatically switches
o.
1 Press the timer button once or
more times to choose the number
of hours you want the humidier to
operate (g. j).
» The corresponding timer light
(1H, 4H or 8H) goes on.
To deactivate the timer function, press
the timer button
repeatedly until the
timer light turns o.
the humidity level you need under the
auto mode. Next time when you switch
on the humidier, it will remember your
last set humidity level, unless you have
removed the plug from the wall socket.
In this case the default humidity level is
set at 50RH% again.
1 Press the speed button to select
the auto mode (g. g).
» The AUTO speed light goes on.
Tip
•
If the desired humidity level is reached,
the humidier changes to a lower fan
speed automatically.
• In AUTO mode, the fan speed changes
between and .
Manual
You can manually select the desired fan
speed.
1 Press the speed button once or
more times to select the desired fan
speed (AUTO,
, or ) (g. h).
» The selected fan speed light
goes on.
Tip
•
If the desired humidity level is reached,
you can select a lower fan speed.
However, if the desired humidity level is
not reached, you can select a higher fan
speed to humidify the air more quickly.