EasyManua.ls Logo

Philips HU4814 - Clean the humidification filter; 6 Replacing the humidification filter; Filter Replacement Frequency; How to Replace the Filter

Philips HU4814
150 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10
EN
4 Clean the inside of the water tank
with a soft clean cloth.
5 Empty the water tank into a sink.
6 Put the humidication lter and the
lter support back into the water
tank.
Clean the humidication
lter
Clean the humidication lter every
week to keep it hygienic.
1 Take out the humidication lter
and the lter support from the water
tank (g. o).
2 Remove the humidication lter
from the lter support (g. p).
3 Soak the humidication lter in tap
water for one hour (g. q).
4 Rinse the humidication lter
under a slowly running tap. Do not
squeeze or wring the lter when
cleaning (g. r).
5 Let excess water drip o the
humidication lter.
6 Assemble the humidication lter
round the lter support (g. d).
7 Put the humidication lter and the
lter support back into the water
tank (g. e).
8 Put the upper unit back onto the
water tank (g. g).
Note
Do not squeeze or wring the lter. This
might damage the lter and impact
humidication performance.
Do not dry the lter under direct
sunlight, unless it is assembled back
onto the lter support
6 Replacing the
humidification
filter
Replace the humidication lter every
three months for optimal performance.
If the lter is in good condition, you
could use it for a longer period of time.
Make sure to replace the humidication
lter at least once a year.
Note
Use only Philips original humidication
lter FY2401.
Always unplug the humidier before you
replace the humidication lter.
Tip
Register your product at
www.philips.com for further information
on how to replace your lter.
1 Take out the humidication lter
and the lter support from the water
tank (g. o).
2 Remove the humidication lter
from the lter support. Discard the
used lter (g. s).
3 Remove the packaging material from
the new humidication lter (g. c).
4 Assemble the new humidication
lter around the lter support (g. d).
5 Put the lter and the lter support
back into the water tank (g. e).
6 Put the upper unit back onto the
water tank (g. g).
Tip
You can easily nd more information
about how to replace the lter in our
web page or by calling our Consumer
Care Center.

Table of Contents