Need help?Do you have a question about the Philips Hue Bridge 2.0 and is the answer not in the manual?
General| Model | Philips Hue Bridge 2.0 |
|---|---|
| Compatibility | Philips Hue lights and accessories |
| Ethernet Ports | 1 |
| Wireless Frequency | 2.4 GHz |
| Max. Number of Lights | 50 |
| Max. Number of Accessories | 12 |
| Connectivity | Ethernet |
| Protocol | Zigbee |
| Mobile App | Philips Hue app |
| Power Supply | 5V DC |
| Dimensions | 88 mm x 88 mm x 26 mm |
| Operating Temperature | 0°C to 40°C |
Details the rectangular box design with rounded corners and button placement.
Describes the LINK push button with a light ring and the factory reset button.
Presents a block diagram of the board's electrical functions and lists key components.
Lists the software components provided by suppliers and Philips for the product's operation.
Outlines requirements for software development access, including serial ports and debugging interfaces.
Details factory programming of binaries, keys, and handling of HomeKit PIN codes.
Covers supplier delivery of factory test and approbation software for the product.
Mentions traceability requirements based on MAC addresses and key combinations.
Specifies requirements for product labels and packaging for direct customer shipment.
Lists different types of power adapters (US, APR, EU) and suggests an EU+UK combined version.
Defines field call rate targets and outlines outgoing quality inspection procedures based on AQL.
Specifies operating/storage conditions, environmental, and mechanical testing procedures.
Lists countries requiring product approval and certification for market entry.
Details WiFi, WAC, and ZigBee certification processes and responsibilities.
Mentions compliance with RoHS, REACH, WEEE, and Philips Green Policies.
States energy efficiency requirements for PSU and IP bridge, and standby compliance.
Specifies radio standards, frequency bands, output power, and antenna details.
To Next Page