Why Philips SRU3004/27 does not operate my product?
If your Philips Remote Control isn't operating your product, try these steps: * Press the mode button for the device you want to control. * Program the remote with a new code. * Install new batteries (reprogramming might be needed afterwards). * Check if the remote is compatible with your product.
How to fix Philips SRU3004/27 Remote Control that does not operate some features?
If your Philips Remote Control doesn't operate some features of your product, you can try programming the remote with a new code. Keep in mind that the remote might not be able to operate all features, or the button names could be different from your product's.
What to do if red indicator blinks after I program a product code on my Philips SRU3004/27 Remote Control?
If the red indicator on your Philips Remote Control blinks after programming a product code, this means the remote didn't accept the code. Try programming the code again or use a different code.
General| Model | SRU3004/27 |
|---|---|
| Brand | Philips |
| Category | Remote Control |
| Number of Devices Controlled | 4 |
| Number of devices | 4 |
| Battery Type | AAA |
| Batteries required | 2 |
| Power Source | Battery |
| Infrared | Yes |
| Type | Remote Control |
| Battery life | 12 months |
| Compatibility | Universal |
Button used for initial remote setup and programming.
Turns the controlled device on or off.
Method for programming remote codes for various devices.
Manually entering a specific 4-digit code for a device.
Automatic search process to find compatible device codes.
Searches for codes specific to a particular brand.
Setting up codes for devices with integrated functions (e.g., TV/DVD).
Selecting which device controls volume/mute functions.
Assigns volume/mute control to a single selected mode for all devices.
Configures a specific mode to exclusively use its volume/mute functions.
Steps to resolve issues where the remote fails to control the device.
Troubleshooting when specific functions are not accessible via the remote.
Diagnosing problems indicated by a blinking red indicator after setup.
To Next Page