Why Philips Remote Control does not operate my product?
If your Philips Remote Control isn't operating your product, try these steps: * Press the mode button for the device you want to control. * Program the remote with a new code. * Install new batteries (reprogramming might be needed afterwards). * Check if the remote is compatible with your product.
How to fix Philips SRU3004WM/17 that does not operate some features?
If your Philips Remote Control doesn't operate some features of your product, you can try programming the remote with a new code. Keep in mind that the remote might not be able to operate all features, or the button names could be different from your product's.
What to do if red indicator blinks after I program a product code on my Philips Remote Control?
If the red indicator on your Philips Remote Control blinks after programming a product code, this means the remote didn't accept the code. Try programming the code again or use a different code.
General| Brand | Philips |
|---|---|
| Model | SRU3004WM/17 |
| Category | Remote Control |
| Language | English |
Step-by-step guide for entering specific four-digit product codes.
Method for searching for product codes by scanning the library.
Setting which device mode controls volume and mute functions.
Designates a single mode for all volume/mute control.
Solutions for problems where the remote does not operate the product.
To Next Page