EN
Quick Start Guide
Getting started in five easy steps.
Press and hold the Standby key
(
yy
) until the TV switches off
(standby).Then release the key
immediately.
Note: the remote control will send
multiple codes to the device
trying to find the correct one.
1
Switch on your TV.
Check if the TV responds to all
key commands.
If the TV does not respond,
continue with step 2.
Press the SET UP key until the
light flashes twice and then
remains lit.
Look up and enter the 4-digit
code for your brand of TV.
See ‘Code list’.
3
Switch on your TV and check if
you can operate all functions on
it with the remote control.
If a key does not function
properly, keep it pressed until it
works.Then release the key
immediately.
4
To Next Page
Need help?
General
