Philips hue Bridge - Product Care and Support; Additional Product Specifications; Cleaning and Maintenance; Customer Support Contact

EXTRA ENVIRONMENTAL SPECIFICATIONS for Hue Bulbs
Temperature (operation) -4 ... 113'F (-20. 45 ·q
Temperature (storage) -13. 140'F (-25 .. . 60 'C)
Relative humidity 5-95% non-condensing
ADDITIONAL PRODUCT SPECIFICATIONS for Hue Dimm er Swi tch and Smart
Butt on
Wall plate installation
Always switch off power prior to installation .
If in doubt, consult a qualified or licensed electrician.
Ensure the product Is always installed according to relevant regulations.
Perchlorate Material special handling may apply
ADDITIONAL PRODUCT SPECIFICATIONS for Hu e Smart Plug
The equipment must be connected to a mains socket outlet with a protective
earthing connection
Before replacing, turn off power and unplug the appliance connected to the
device.
Do not exceed the maximum load as indicated on the product.
The product is designed to switch on and off light sources. We recommend
not to connect other appliances to the plug
Do not connect any Hue lamp to the product.
t,( Do not connect multiple devices one after the other .
CLEANING AND MAINTENANCE.
Do not clean the device when It is on and connected to the power supply.
To avoid scratching the device, clean only with a soft dry cloth.
Do not use cleaning agents to clean the device.
Manage In accordance with disposal laws in your area.
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such marks by Signify is under license
Other trademarks and trade names are those of their respective owners.
Hue Personal Wireless Lighting is a trademark owned by Signify Holding B.V.
Phillps and the Phillps shield emblem are registered trademark .s of
Koninklijke Phlllps NV
CUSTOMER SUPPORT
For more information, please visit our website at
www.phllips-hue com/support, or call our customer service
(1-800-555-0050)