Philips HUE GO - User Manual

Displays various preset lighting scenes like Warm White, Cozy Candle, etc.

Turn on and change light effects with a single press.

Hue Go has 7 presets: 2 white light, 5 dynamic effects.

Double press and hold to cycle through colors.

Release button to select current color.

Repeat action to reverse color loop.

Press and hold button for 2 seconds to enter standby.

Device turns off automatically after 2 hours in standby.

Press and hold button for >10 seconds until device blinks twice.

Device blinks twice to confirm it is turning off.

Light output is 100% when connected to an outlet.

Light output is 40% on battery to maximize life.

Fully charged in 1.5 hours.

Up to 3 hours on a full charge.

Ensure the Hue Go device is switched on.

Plug in and connect the Hue bridge to your Wi-Fi router.

Download and use the app for device control and setup.

Visit meethue.com for additional products and apps.

Connect to mains power for timers/alarms exceeding 2 hours.

Device turns off after 2 hours in standby if not plugged in.

Turn off power, observe wiring, grounding, and connector safety.

Avoid wire damage, do not remove thermal insulation.

Use a dry cloth; avoid liquids, abrasives, and solvents.

Proper handling of batteries, including installation, mixing, and charging.

Device complies with FCC rules; maintain 20cm distance.

Electrical shock risk, indoor use, adapter usage.

Details the 2-year warranty terms and conditions.

RF band, protocol, operating temperature, and humidity.