Philips LX Series User Manual

LX Series
HEAVY DUTY LED EXIT
Page 1 of 2
Job Information Type:
Job Name:
Cat. No.:
Notes:
Features
Illumination: Illumination
of the exit stencil face is
accomplished with either
red or green high-output
Light Emitting Diodes (LEDs).
Hot spots and striations are
eliminated by a combination
of indirect and direct aiming
points covering the exit stencil
face.
Housing: Constructed of
three-piece, 20 gauge, cold
rolled steel. White powder
coat finish is standard, black
is optional. NFPA-compliant
field-selectable chevrons. UL
damp location listing is available
on the AC Only version.
Universal knockouts located
on the backplate allow for wall
mounting directly to standard
junction boxes. A mounting
canopy is provided for top and
end mount applications.
Operating Temperature
Range: Standard Location
65°F (19°C) to 85°F (30°C)
Damp Location
50°F (10°C) to 104°F (40°C)
Electronics: AC Only -
120/277 VAC dual voltage
input.
Self-Powered - 120/277 VAC
dual voltage input with surge-
protection, solid-state circuitry
provides for a reliable charging
system. Charging system is
complete with low voltage
disconnect, AC lockout,
brownout protection, AC
indicator lamp and test switch.
Electrical Specifications:
AC Only Red:
0.030 A (120 VAC)
0.013 A (277 VAC)
AC Only Green:
0.035 A (120 VAC)
0.015 A (277 VAC)
Self-Powered Red:
0.037 A (120 VAC)
0.016 A (277 VAC)
Self-Powered Green:
0.037 A (120 VAC)
0.016 A (277 VAC)
Code Compliance
UL 924 listed. Optional UL
damp location (AC only
versions) listed. NFPA 101,
NEC, BOCA, OSHA and IBC
illumination standards.
Warranty
Three year full electronics
warranty. Five year full,
five year prorated battery
warranty.
12.5"
(31.8 cm)
LXN1RW
7.8"
(19.9 cm)
6.8"
(17.3 cm)
2.0"
(5.1 cm)
4.8"
(12.2 cm)
2.5"
(6.4 cm)

Philips LX Series Specifications

General

Input Voltage	220-240V AC
CRI	>80
Series	LX
Color Temperature	3000K, 4000K
Beam Angle	120 degrees
Material	Aluminum

Summary

Product Features

Illumination Details

Describes illumination using red or green high-output LEDs with indirect/direct aiming.

Housing Construction

Details the three-piece, 20-gauge cold-rolled steel housing with powder coat finish.

Operating Temperature Range

Specifies temperature limits for standard and damp locations.

Electronics and Specifications

Electronics Overview

Details AC Only and Self-Powered electronics with voltage input and charging system features.

Electrical Specifications

Lists power consumption (Amps) for AC Only and Self-Powered, Red and Green LEDs.

Code Compliance and Warranty

Code Compliance Standards

Lists UL, NFPA, NEC, BOCA, OSHA, and IBC standards met by the product.

Warranty Information

Details the three-year electronics and five-year battery warranty.

Ordering Information

Product Accessories

Lists optional accessories available for purchase, such as canopy kits and wire guards.