Philips In Ear 1000 Series - Earpiece Battery LED Indicator; How to Wear; Factory Resetting the Earpieces

9EN
Battery LED indicator on
earpieces status
It will show a battery indicator on Bluetooth
device after connected to earpieces.
How to wear
Factory reset 5
the earpieces
If you encounter any pairing or connection
issue, you can follow the following procedure to
factory reset your earpieces.
1
On your Bluetooth device, go to the
Bluetooth menu and remove Philips
UT102 from the device list.
2
Turn o the Bluetooth function of your
Bluetooth device.
3
Put both earpieces back to charging case.
Both earpieces flashes white led. Press and
hold both earpieces function button for
4s,until earpieces flashes twice white led.
4
To pair the earpieces with a Bluetooth
device, turn on the Bluetooth function
of your Bluetooth device, select Philips
UT102.