21
3
3Configuring Screens
During monitoring, you can change the content of most of the Screen elements, for example you can
exchange a Resp wave for a Pressure wave. These changes can be permanently stored as part of the
Screen settings in configuration mode.
You can also use the IntelliVue Support Tool to configure Screens offline on a personal computer and
then upload them as part of a configuration file to one or more patient monitors. To use the IntelliVue
Support Tool for Screen configuration, you must have a support tool and a support tool license key
that entitles you to use the Screen configuration functionality. See "About the IntelliVue Support
Tool" on page 11 and the Support Tool Instructions for Use.
Understanding Screen Settings
Screen settings are stored in the Screen. Changing a Screen setting modifies the Screen. This is
indicated by an asterisk (*) in front of the Screen name. In the Change Screen menu, modified Screens
are shown linked to their parent Screens.
Screen settings include:
• the basic layout of a Screen, i.e. the selection, size, and position of any Screen element visible on the
Screen. The Screen layout cannot be modified in the monitor’s configuration mode.
• the content of each Screen element, i.e. the information displayed in each Screen element.
• the selection and sequence of SmartKeys available on a Screen.
To Next Page
Loading...