3 Configuring Screens Modifying an Existing Screen
22
• special settings that determine the behavior of certain Screen elements, such as Screen trends, realtime
waves, embedded trend windows, or embedded Other Bed Overview windows.
Modifying an Existing Screen
To change an existing Screen:
1 Load the Screen and make the changes to the Screen.
2 In configuration mode, select Profiles -> Display (or Display 2, or Display 3).
3 In the list of Screens, the modified Screen is shown linked to the original Screen and marked with an
asterisk (*). Select the Store pop-up key to overwrite the existing Screen. Changes to the Screen
affect all Profiles in which this Screen is used.
NOTE Changes made to a Screen viewed on an XDS Remote Display will be stored on the PC connected to the
XDS Remote Display and will not be part of the monitor configuration, see "Configuring Screens on an
XDS Remote Display" on page 22.
Creating New Screens
1 Load a Screen similar to the one you want to create from the list of Screens available in the monitor.
2 Create a new Screen based on the active Screen:
a. In the Profiles menu, select Display (or Display 2, or Display 3).
b. Select the pop-up key New.
c. Use the on-screen keyboard to type a meaningful name for the new Screen. If you do not name the
Screen, the monitor will assign a default name. You can rename it later.
d. Select Enter.
3 Change the content of the Screen as required.
4 Store the finished Screen:
a. In the Profiles menu, select Display (or Display 2, or Display 3).
b. Select the pop-up key Store and then Confirm to apply your changes. There is no undo
function.
NOTE Changes made to a Screen viewed on an XDS Remote Display will be stored on the PC connected to the
XDS Remote Display and will not be part of the monitor configuration, see "Configuring Screens on an
XDS Remote Display" on page 22.
Configuring Screens on an XDS Remote Display
For certain IntelliVue monitor models, the XDS Remote Display (IntelliVue XDS solution) can be used as
second or third main display.
When you make changes to a Screen that is viewed on an XDS Remote Display, be aware of the following
implications:
• The changes are stored on the XDS Remote Display and not on the monitor.
To Next Page
Loading...