29
English
Problem
Possible cause Solution
You have used a light
intensity setting which is
too low for you.
Select a higher setting next time.
You did not flash an area
adjacent to an area you
treated before.
You have to release the flashes close to, but
not overlapping, the previous spot.
The device is not effective
on your body hair color.
If you have light blond, grey, red or white hair,
the treatment is not effective.
You do not use the device
as often as recommended.
To remove all hairs successfully, we advise you
to follow the recommended treatment
schedule. You can reduce the time between
treatments, but do not treat more often than
once every two weeks.
The results of the
treatment are not
satisfactory.
You respond more slowly
to IPL treatment.
Continue using the device for at least 6
months, as hair regrowth can still decrease
over the course of this period.
Warranty and support
If you need information or support, please visit www.philips.com/support or
read the international warranty leaflet.
Recycling
-
This symbol means that this product shall not be disposed of with normal
household waste (2012/19/EU).
-
Follow your country's rules for the separate collection of electrical and
electronic products. Correct disposal helps prevent negative
consequences for the environment and human health.
Technical specifications
Transport and storage
conditions
Lumea Prestige remains operational in NORMAL USE within its
specification after transport or storage in the following environmental
range:
-25°C to +70°C up to 90% RH, non‑condensing, 700hPa to 1060hPa
Operating temperature
conditions
Lumea Prestige complies with its specifications when operated in NORMAL
USE under the following environmental operating conditions:
+5°C to +35°C up to 90%RH, non-condensing, 700hPa to 1060hPa
Emitted wavelengths 565 to 1400 nm
Pulse duration 1 - 2.5ms, for all settings
To Next Page
Loading...
