15
English
3 Press the on/off button to turn on the device.
4 Choose an area for your skin test.
5 Press the device firmly onto your skin and hold it in place.
The integrated safety system prevents unintentional flashingwithout full skin
contact.
6 Confirm that the 'READY to flash' light lights up white to ensure that there is
full contact with your skin.
-
If the 'READY to flash' light is orange, your skin is too dark to treat. Try Lumea
on a lighter body area.
7 Try each setting on your skin and find your comfortable setting.
If the flash feels uncomfortable and you experience pain, lower the setting.
If you still experience an uncomfortable feeling while using the lowest setting
(➀), please stop using the device.
-
When the 'READY to flash' light is white, press the flash button on the handle
once, to treat one spot with setting ➀.
The device makes a soft popping sound. The flash gives you a warm
sensation.
• You will see a flash of light.
Note: You can toggle through the light intensity settings by pressing the
toggle button.
-
Move to next area. Treat one spot with setting ➁
To Next Page
Loading...
