Philips Lumea BRI977 - Technical specifications

28
English
stream. Refer to the Philips Lumea support website for recycling options. Do not
dispose of in fire.
Technical specifications
Transport and storage
conditions
Lumea remains operational within its specification in NORMAL USE after
transport or storage in the following environmental conditions:
-25°C to 70°C up to 90% RH, non‑condensing, 700hPa to 1060hPa
Operating conditions Lumea complies with its specifications when operated in NORMAL USE under
the following environmental operating conditions:
5°C to 35°C up to 90%RH, non-condensing, 700hPa to 1060hPa
Emitted wavelengths 565 to 1400 nm
Pulse duration Between 1–2.5milliseconds, for all settings
Flash interval Between 2–3.5 seconds depending on battery/mains-connected use
Optical exposure Body attachment: 2.5–5.6J/cm
2
Underarm attachment: 2.5–6.5 J/cm
2
Precision attachment: 2.5–6.5J/cm
2
Bikini attachment: 2.5–6.5J/cm
2
Face attachment: 2.4–5.9J/cm
2
Adapter input 100–240 V 50/60 Hz 1.5 A
Adapter output 19.5V 3.33 A 65.0 W
Average active efficiency ≥88.0%
Efficiency at low load
(10%)
≥79.0%
No-load power
consumption
<0.21W
Adapter type number The reference number (AD2069x20020HF) can be found on your device. The
letter ‘x’ denotes type of plug, it can be: 0, 1, 2, 3, 5, 7, 9, or H.
Electromagnetic compatibility – Compliance
information
This device complies with all applicable standards and regulations regarding
exposure to electromagnetic fields.
Explanation of symbols
The warning signs and symbols are essential to ensure that you use this product
safely and correctly and to protect you and others from injury. Below you find
the meaning of the warning signs and symbols on the label and in the user
manual.