EasyManua.ls Logo

Philips Lumea Prestige BRI956 - Handling the Lumea Device; Skin Type to Intensity Chart

Philips Lumea Prestige BRI956
106 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Skin type Skin tone Light intensity setting
I White: you always sunburn,
never tan.
4/5
II Beige: you easily sunburn, tan
minimally.
4/5
III Light brown: you sunburn easily,
tan slowly to light brown.
4/5
IV Mid brown: you rarely sunburn,
tan easily.
3/4
V Dark brown: you rarely sunburn,
tan very easily.
1/2/3
VI Brownish black or darker: you
rarely or never sunburn, very
dark tanning.
You cannot use the device
Note: To check if your skin type allows usage of the device, consult the skin
tone table with number 2 on the foldout page.
Note: Your skin may react dierently on dierent days/occasions for a
number of reasons.
Handling the device
1 Before use, clean the attachment and the light exit window.
2 Put the small plug in the device and put the adapter in the wall socket.
Note: If the device is not fully charged when you start a treatment, the
battery will run out during a full body treatment. We advise you to always
fully charge the device before you start a treatment or to use it corded.
3 Switch on the device and select the right light intensity for your skin tone.
For selecting the right skin tone, you can make use of the setting advice,
see chapter: 'Selecting the right light intensity'.
4 Place the device at a 90° angle on the skin so that the integrated safety
system is in contact with your skin.
The integrated safety system prevents unintentional ashing without skin
contact.
22
English

Table of Contents

Other manuals for Philips Lumea Prestige BRI956

Related product manuals