-
Hair removal by intense pulsed light sources can cause increased
hair growth in some individuals. Based upon currently available
data, the highest risk groups for this response are females of
Mediterranean, Middle Eastern and South Asian heritage treated
on the face and neck.
-
The light exit window and the filter of the attachments can become
very hot after use. Do not touch the inner part of the light exit
window and the filter of the inner part of the attachments without
letting them cool down first.
-
For the purpose of recharging the battery, only use the detachable
supply unit (A00440) provided with this appliance (see symbol).
Note: If you notice a skin tone change from the last treatment (e.g.
due to tanning), we recommend that you perform a skin test and to
wait 30 minutes before your next treatment.
To prevent damage
-
Make sure that nothing obstructs the airflow through the
ventilation slots of the device.
-
Never subject the device to heavy shocks and do not shake or
drop it.
-
If you take the device from a very cold environment to a very warm
environment or vice versa, wait approximately 3 hours before you
use it.
-
Store the device in a dust free and dry place.
-
Do not expose the device to temperatures lower than 5°C or higher
than 35°C during use.
-
To prevent damage, do not expose the device to direct sunlight or
UV light for several hours.
12
English
To Next Page
Loading...
