What to do if Wi-Fi connection cannot be established on Philips M8881WW/90?
If a Wi-Fi connection cannot be established for your Philips Speaker System, try the following: * Check the availability of WLAN network on the router. * Place the Wi-Fi router closer to the unit. * Make sure the password is correct. * Check the WLAN function or reboot the modem and Wi-Fi router.
How to improve Philips Radio reception?
If your Philips Radio isn't getting a good signal, try these steps: * Keep the radio away from other electronic devices that might cause interference. * Fully extend and adjust the position of the radio antenna. * If you are using Wi-Fi, check the network connection and rotate or adjust the position of the Wi-Fi antenna.
Why do some Philips Radio stations not work sometimes?
Some stations can only support a limited number of listeners. If some stations do not work on your Philips Radio, try again after a few minutes. Also, the station may not be broadcasting at the moment, so try again later.
Why do some Philips Radio stations disappear from the list?
When a station stops broadcasting on the Internet, it will be removed from the list on your Philips Radio. The radio will check constantly if the station is on the air. If it restarts broadcasting, it will be brought back to the station list.
How to fix no power on Philips M8881WW/90 Speaker System?
If your Philips Speaker System has no power, check the following: * Ensure that the AC cord is properly connected. * Ensure that there is power at the AC outlet. * Press the button on the remote control or soundbar to turn the soundbar on.
Why is my Philips Speaker System remote control not working?
If the remote control for your Philips Speaker System is not working, try these steps: * First select the correct source before pressing any playback control button. * Reduce the distance between the remote control and the unit. * Ensure the battery is inserted with correct polarities (+/-) as indicated. * Replace the battery. * Aim the remote control directly at the sensor on the front of the unit.
What to do if I cannot discover Play-fi supported devices from the app for Philips Speaker System?
To resolve the issue of not being able to discover the Play-fi supported devices from the app with your Philips Speaker System, make sure the device is connected to the Wi-Fi.
How to synchronize audio and video on Philips M8881WW/90?
If the audio and video are not synchronized on your Philips Speaker System, press the button to synchronize the audio with the video.
Why won't my Philips Radio connect to Wi-Fi?
If your Philips Radio cannot connect to your Wi-Fi network, check if your wireless router is switched on and supports WPS. If it does, use the correct setup method (PBC or PIN) to connect. You can also configure the Wi-Fi settings again.
What to do if my Philips Radio is not responding?
If your Philips Radio isn't responding, try disconnecting and reconnecting the AC power plug, then turn the radio on again. Also, check to see if the radio is in standby mode; if it is, turn it on.
General| Model Number | M8881WW/90 |
|---|---|
| Category | Speaker System |
| Brand | Philips |
| Charging Time | 3 hours |
| Color | White |
| Product Type | Portable Speaker |
| Connectivity | Bluetooth |
| Frequency Response | 20kHz |
| Dimensions | 70 x 70 |
To Next Page
