11
English
3140 115 27782
Basic Functions
INTERACTIVE SOUND
RDS
DBB
DSC
PRESETSTOP PLAY• PAUSE
iR
SENSOR
VOLUME
INCREDIBLE SURR.
CD
CLOCK
STANDBY
ON
PROGRAM
TIMER
ON•OFF
REPEAT
SELECT
SOURCE
PROGRAM
SHUFFLE
REV MODE
BAND
TUNING
SIDE A/B
TUNING
RECORD
PREV NEXT
CD
PROGRAM
TIMER
IMPORTANT:
Before you operate the system, complete
the preparation procedures.
Switching on
There are 3 ways to switch the system on:
¶ press 2 STANDBY ON on the system and
the last selected source switches on;
¶ press SELECT SOURCE on the system and
the last selected source switches on;
¶ press CD, TUNER, TAPE or AUX on the
remote control.
To switch the system to standby, press 2
STANDBY ON once on the system (2 on
the remote control).
¶ If in recording mode, press STOP 9 (on the
remote control 9 ) first.
➜ The volume level, interactive sound settings,
last selected source and tuner presets will be
retained in the player's memory.
Power-saving automatic standby
As a power-saving feature, the system
automatically switches to standby 15 minutes
after a tape or CD has reached the end and no
control is operated.
Adjusting volume and sound
1 Turn the VOLUME control anti-clockwise to
decrease or clockwise to increase volume on the
system (or press VOLUME -/+ on the
remote control).
➜ Display shows the volume level VOL and a
number from 0-32.
2 Press the Interactive sound control, DSC on the
system or remote control once or more to
select the desired sound effect: OPTIMAL (no
indication)/ ROCK ( ) / JAZZ ( )/
POP ( ) .
3 Press DBB to switch bass enhancement on or
off.
➜ Display shows:
DBB
if the DBB is activated.
4 Press INCREDIBLE SURROUND (INC.
SURR. on the remote control) to switch the
surround sound effect on or off.
➜ Display shows: if activated.
Note:
– The effect of INCREDIBLE SURROUND may
vary with different types of music.
5 Press MUTE on the remote
control to interrupt sound
reproduction instantly.
➜ Playback will continue
without sound and the display
shows MUTE.
¶ To activate sound reproduction you can:
– press MUTE again;
– adjust the volume controls;
– change source.
DS
DBB
MUTE
SI
To Next Page
Loading...
