12
English
3140 115 2xxx1
Basic Functions
TUNING
CLOCK
SIDE A/B
VOLUME
SHUFFLE
SOURCE
TIMER ON•OFF PROGRAM
REPEAT
REV MODE/ BAND
STANDBY-ON
RECORD
MC
-
30 MICRO SYSTEM
iR
FWD á/ë
REW à /í
PRESET
STOP
PLAY•PAUSE
IMPORTANT:
Before you operate the system, complete
the preparation procedures.
Switching on
There are 3 ways to switch the system on:
¶ press 2 STANDBY ON on the system and
the last selected source switches on;
¶ press SOURCE on the system and the last
selected source switches on;
¶ press CD, TUNER, TAPE or AUX on the
remote control.
To switch the system to standby, press 2
STANDBY ON once on the system (2 on
the remote control).
¶ If in recording mode, press 9 first.
➜ The volume level, interactive sound settings,
last selected source and tuner presets will be
retained in the player's memory.
Power-saving automatic standby
As a power-saving feature, the system
automatically switches to standby 15 minutes
after a tape or CD has reached the end and no
control is operated.
Adjusting volume and sound
DSC
DBB
MUTE
SIDE
NEWS/TA
Å
INC. SURR
VOLUME
É
1 Turn the VOLUME control counter-clockwise
to decrease or clockwise to increase volume on
the system (or press VOLUME -/+ on the
remote control).
➜ Display shows the volume level VOL and a
number from 0-32.
2 Press DBB on the remote control to switch
bass enhancement on or off.
➜ Display shows: if the DBB is
activated.
3 Press DSC on the remote control once or
more to select the desired sound effect:
OPTIMAL (no indication)/ ROCK ( ) /
JAZZ ( ) /POP ( ).
4 Press INC. SURR. on the remote control to
switch the surround sound effect on or off.
➜ Display shows: if activated.
Note:
– The effect of INCREDIBLE SURROUND may
vary with different types of music.
5 Press MUTE on the remote control to
interrupt sound reproduction instantly.
➜ Playback will continue without sound and the
display shows MUTE.
¶ To activate sound reproduction you can:
– press MUTE again;
– adjust the volume controls;
– change source.
pg 001-021/MC30/37-Eng 12/8/00, 9:09 AM12
To Next Page
Loading...
