Philips MC-320 - System Specifications; Technical Performance Data

MC-320/37-1
20
English
Specifications
AMPLIFIER
Output power ................................ 40 W total power
............................. 2 x 20 W RMS
(1)
/ 2 x 18W FTC
(1)
Signal-to-noise ratio ....................................... ≥ 62 dBA
Frequency response .........63 – 16000 Hz, ± 3 dB
Input sensitivity AUX ....................... 0.5 V (max. 2 V)
Impedance loudspeakers ......................................... 6 Ω
Impedance headphones .................... 32 Ω -1000 Ω
......................................................................................... <0.5W
(1) (6 Ω, 60 Hz – 12.5 kHz, 10% THD)
CD PLAYER
Frequency range .................................. 30 – 16000 Hz
Signal-to-noise ratio ............................................ 75 dBA
TUNER
FM wave range ...................................87.5 – 108 MHz
AM wave range .................................. 530 – 1700 kHz
Sensitivity at 300 Ω
– mono, 26 dB signal-to-noise ratio ............ 2.8 µV
– stereo, 46 dB signal-to-noise ratio ........ 61.4 µV
Selectivity ................................................................. ≥ 28 dB
Total harmonic distortion..................................... ≤ 5%
Frequency response ..... 63 – 12500 Hz (± 3 dB)
Signal-to-noise-ratio ...................................... ≥ 50 dBA
TAPE DECK
Frequency response
Normal tape (type I)...... 80 – 12500 Hz (8 dB)
Signal-to-noise ratio
Normal tape (type I).................................... 50 dBA
Wow and flutter ......................................... ≤ 0.4% DIN
SPEAKERS
Bass reflex system
Dimensions (w x h x d) . 166 x 225 x 244 (mm)
.............................................................6.5 x 8.8 x 9.6(inch)
GENERAL INFORMATION
AC Power .................................................... 120V / 60 Hz
Dimensions (w x h x d) ... 166 x 225 x 274(mm)
.......................................................... 6.5 x 8.8 x 10.8(inch)
Weight(with/without speakers) ........... 8.4 / 4.3 kg
.................................................................. 18.5 / 9.5 pounds
Standby power consumption ............................ <6W
Subject to modification
Clock/Timer
Activating and deactivating
SLEEP
The sleep timer enables the system to switch
off by itself after a set period of time.
● Press SLEEP on the remote control once or
more.
➜ Display shows SLEEP
and one of the sleep time
options in sequence: 90, 80,
70, 60,..., 20,10, OFF, 90. if
you have selected a time.
Once SLEEP is activated,
SLEEP is display.
● To deactivate, press SLEEP on the remote
control once or more until OFF is shown, or
press STANDBY ON on the system or
remote control.
➜ OFF is displayed.