11
3140 115 xxxxx
English
Basic Functions
IMPORTANT!
Before you operate the system, complete
the preparation procedures.
Switching the system on
● Press STANDBY-ON / 2.
➜ The system will switch to the last selected
source.
● Press SOURCE (or CD, TUNER or AUX on
the remote control).
➜ The system will switch to the selected source.
● Press OPEN • CLOSEç.
To switch the system to standby mode
● Press STANDBY-ON / 2.
➜ The system enters the standby mode with
clock display.
● The volume level (up to a maximum volume
level of 20), interactive sound settings, source
and tuner presets will be retained in the player's
memory.
Adjusting volume and sound
1 Press the VOLUME 3 / 4 (+/-) control to
decrease or increase the volume.
➜ Display shows the volume level VOL and a
number from MIN1, 2, ...30, 31 MAX.
2 Press DSC repeatedly to select the desired
sound effect: ROCK/ JAZZ/ POP/ CLASSIC.
3 Press DBB to switch bass enhancement on or
off.
➜ Display shows: DBB.
4 Press MUTE on the remote control to
interrupt sound reproduction instantly.
➜ Playback will continue without sound and the
display shows MUTE.
● To activate sound reproduction you can:
– press MUTE again;
– adjust the volume controls;
– change source.
MC235B_235_79_Eng 13/2/07, 16:4311
To Next Page
Loading...
