EasyManua.ls Logo

Philips MCD288E/12 - System Controls Overview; Main Unit Controls; Remote Control Identification

Philips MCD288E/12
38 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
English
21
Controls
Controls on the system
1 ECO POWER/STANDBY ON B
to switch the system on or to Eco power/normal
standby mode.
2 iR sensor
infrared sensor for remote control.
3 CLOCK
sets or displays the system clock.
4 Mode Selection
9 ............................. In DISC/USB mode, to stop
playback or clear a program.
......................................... for Demo (on the system
only) to activate/deactivate
the demonstration.
2; ........................... In DISC/USB mode, to start or
interrupt playback.
PRESETí/ë
Disc/USB: skips to the previous/next chapter/
title/track.
Tuner: selects a preset radio station.
TUNING 22/33
Tuner
press to tune to a lower/higher radio frequency
gradually.
press and hold, then release the key to start
automatic search for a radio frequency
downward/upward.
Disc/USB
searches fast backward/forward.
5 Display screen
to view the current status of the system.
6 SOURCE
to select the respective sound source: DISC
TUNER or USB/AUX.
7 VOLUME -/+
adjusts the volume upward/downward.
adjusts the hours and minutes in clock/timer
setting mode.
selects a source in timer setting mode.
8 n
– to connect a headphone.
9 EJECT
ejects a disc from the disc loader.
0 AUX-IN
connects an external non-USB device.
! USB DIRECT
is the jack for the external USB mass storage
device.
@ SLIDE OPEN 4
slides down to expose some buttons and jacks
on the front panel.
Controls on the remote control
1 y
to switch the system on or to Eco power/normal
standby mode.
2 Numeric Keypad (0-9)
inputs a track/title/chapter number.
3 PROG/ANGLE
–Tuner: programs preset radio stations.
–DVD: selects a DVD camera angle.
4 SOURCE
to select the respective sound source : DISC
TUNER or USB/AUX.
5 SYSTEM MENU (disc/USB mode only)
to enter or exit the system menu bar.
6 DISC MENU (disc/USB mode only)
–DVD/VCD: enters or exits the disc contents
menu.
VCD2.0: switches the playback control mode on
or off .
7 22/33
Tuner
press to tune to a lower/higher radio frequency
gradually.
press and hold, then release the key to start
automatic search for a radio frequency
downward/upward.
Disc
(not for MP3 CD) searches backward/forward in
a disc at different speeds.
In DISC mode, to select a movement direction in
the disc menu or system menu bar.
pg001-pg024_MCD288E-12-Eng-A 2007.12.21, 17:2221

Table of Contents

Related product manuals