Tips
– See the User Manual for other TV
connection options.
–For connecting to a Progressive Scan
TV, refer to the user manual for proper
connections and detailed setup.
1
2
4
3
Setting up the TV
1
2
Press SOURCE (DISC on the remote) to select disc source.
Turn on the TV and set it to the correct Video In channel.
5
Connect the speaker cables.
Connect the MW and FM antennas.
Connect the control cable.
Connect the composite video cable to a TV.
Connect the power cords of the system and TV.
STOP
STOP
Speaker
(right)
Speaker
(left)
FM antenna
AC power
MW antenna
MCD908 QUG_12_Eng 2007.1.15, 17:002
To Next Page
Loading...
