Philips MCM166/12 - Safety and Warnings; General Safety Instructions

1
2
Connect the speaker cables.
Speaker
(right)
Speaker
(left)
FM antenna
AC power
Tip
See the User Manual on how to
connect other equipment to this
system.
Connect the AC power cord to the wall
socket.
5
3
7
6
4
2
Set clock
1
Press and hold CLOCK (or CLOCK/DISPLAY on the remote control) to activate the clock
setting mode.
The 12 hour or 24 hour format is displayed.
«
Press PROG repeatedly to select 12 hour or 24 hour format.
Press CLOCK (or CLOCK/DISPLAY on the remote control) to confi rm.
The hour digits are displayed and begin to blink.
«
Press
§
/
∞
(or
5
/
6
on the remote control) to set the hour.
Press CLOCK (or CLOCK/DISPLAY on the remote control) to confi rm.
The minute digits are displayed and begin to blink.
«
Press
§
/
∞
(or
5
/
6
on the remote control) to set the minute.
Press CLOCK (or CLOCK/DISPLAY on the remote control) to confi rm.
MCM166_12_QSG_Eng.indd 2MCM166_12_QSG_Eng.indd 2 2/17/2009 3:37:38 PM2/17/2009 3:37:38 PM