Philips MCM166/12 - Page 3

4
3
2
1
Play disc
Press SOURCE (or DISC on the remote control) to select the disc source.
Lift the top panel to open the disc tray.
Insert a disc with the printed side facing up, then close the disc tray.
Press
ÉÅ
to start play.
To stop play, press
9
.
5
1
2
3
Insert the USB device’s USB plug into the socket on the main unit.
Press SOURCE once or more (or USB on the remote control) to select USB.
Play the USB’s audio fi les as you do with the albums/tracks on a CD.
Play USB
With the Hi-Fi system, you can use USB fl ash memory (USB 2.0 or USB1.1),
USB fl ash players (USB 2.0 or USB1.1)
,
memory cards (requires an additional card reader to
work with this Hi-Fi system).
MCM166_12_QSG_Eng.indd 3MCM166_12_QSG_Eng.indd 3 2/17/2009 3:37:39 PM2/17/2009 3:37:39 PM