Note
Insert the stripped portion of each speaker wire into the socket •
completely.
For optimal sound, use the supplied speakers only.
•
Connect only speakers with impedance that is the same or higher •
than the supplied speakers. Refer to the Specifi cations section of this
manual.
To insert each speaker wire: Hold down the socket fl ap. Insert the
speaker wire fully. Release the socket fl ap.
1 For the right speaker, fi nd the sockets on the main unit marked
‘RIGHT’.
2 Insert the red wire to the red (+) socket.
3 Insert the black wire into the black (-) socket.
4 For the left speaker, fi nd the sockets on the main unit marked
‘LEFT’.
5 Repeat steps 2-3.
To Next Page
Loading...
