Philips MCM204/12 - UK Important Notes; Mains Plug and Fuse; Connecting Plug Wires; UK Copyright Law

Step A
Setup
1
2
3
Connection
5
1
2
3
4
Setting the clock
For radio reception, connect the supplied MW antenna to the
MW aerial terminal.
Connect the speaker wires to the
SPEAKERS terminals.
Connect the power cord of the system to the
AC power outlet.
In standby mode, press and hold
DISPLAY/CLOCK
(CLOCK on the remote control) for 2 seconds.
The clock digits for the hours flash.
Press TUNING ¡1 / 2™ to set the hours.
Press DISPLAY/CLOCK again. The clock digits for the minutes flash.
Press TUNING ¡1 / 2™ to set the minutes.
Press DISPLAY/CLOCK to confirm the time.
speaker
(right)
speaker
(left)
FM wire antenna
MW loop
antenna
AC power cord
FM
AERIAL
AM
AERIAL
AU
HEADPHON
X
E
1
2
3
MICRO SYSTEM MCM204
ALBUM/
Tip:
It is unnecessary to
connect the FM pigtail
antenna since it is
fixed to the main unit.
MCM204 QUG_Eng 12/1/07, 11:282