1
2
3
4
5
Tip:
Detailed playback features and
additional functions are described in
the accompanied owner's manual.
Step B
Enjoy
Playing a disc
1
2
Select TUNER source.
Press PROG on the remote control for more than two seconds to program all available stations
in order of waveband.
Press ALBUM/PRESET 4 3 until the desired preset station is displayed
Programming and tuning to radio stations
3
Select CD source.
Press OPEN/CLOSE on the top of the system to open the CD door.
Insert a disc with the printed side facing up and press down
on OPEN/CLOSE to close the CD door.
PressÉÅto start playback.
Press 9 to stop playback.
Notes for the remote control:
– First, select the source you wish to
control by pressing one of the source select
keys on the remote control (DISC or AUX,
for example).
– Then select the desired function ( 2;,
í, ë for example).
MCM204 QUG_Eng 12/1/07, 11:283
To Next Page
Loading...
