Philips MCM530 - Philips Sound Agent 2; Enabling Digital CD Audio Output

2-2
2-2
Dismantling of the Front Panel assembly
1) The Knob Volume (pos 136) can be remove by pulling it out
in the direction as shown in Figure 7.
2) Loosen 4 screws D (see Figure 8) to remove the Bracket
Top (pos 251) and CDC Key Board (pos 1105B).
3) Loosen 2 screws E (see Figure 8) to remove the Bracket
Combi (pos 252).
4) Loosen 9 screws F (see Figure 8) to remove the Front
Board (pos 1105A).
5) Loosen 3 screws G (see Figure 8) to remove the USB PC
LINK Board (pos 1106).
Dismantling of the Rear Panel assembly
1) Loosen 3 screws H and 2 catches C3 (see Figure 9)
to remove the Tuner Board assembly.
2) Loosen 1 screw K (see Figure 9) to free the Mains
Socket Board (pos 1102-1002B).
3) Loosen 4 screws J and 2 catches C4 (see Figure 9)
to remove the Cabinet Rear (pos 256) by sliding it
out towards the rear (see Figuer 10).
Note : Tuner Board assembly and Mains Socket
Board can also be remove together with the
Cabinet Rear.
4) Loosen 4 screws L (see Figure 9) to remove the Fan
(pos 1104) from the Cabinet Rear.
Figure 7
Figure 8
DISMANTLING INSTRUCTIONS
Figure 9
Figure 10