EasyManua.ls Logo

Philips Micro Hi-Fi MCM276R - Tuner; Tuning to radio stations; Manual programming; Autostore: Automatic programming

Philips Micro Hi-Fi MCM276R
34 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
English
23
Tuner
Tuning to radio stations
1 Press SOURCE once or more to select
TUNER (or TUNER on the remote control)
2 Press TUNER on the remote control
repeatedly to select your desired waveband, FM
or AM
Display shows: , radio station
frequency, waveband and if programmed, a
preset number
3 Press and hold 4 / ¢ until SEARCH
appears
The radio automatically tunes to a station
with sufficient reception. Display shows SEARCH
during automatic tuning
FM: If a station is received in stereo, is
shown
4 Repeat step 3 if necessary until you find the
desired station.
To tune to a weak station, press 4 / ¢
briefly and repeatedly until you have found
optimal reception.
Programming radio stations
You can store up to a total of 40 radio stations
(FM and AM) in the memory, manually or
automatically (Autostore).
Autostore: Automatic programming
Automatic programming will start from preset 1
or a chosen preset number. From this preset
number upwards, former programmed tuner
stations will be erased. The set will only program
stations which are not in the memory already.
/
1 Press the ALBUM/ PRESET buttons once or
more to select the preset number where
programming should start.
Note:
If no tuner preset number is selected, default is
preset 1 and all your presets will be erased.
2 Press and hold PROGRAM until AUTO
appears
flashes
Available stations are programmed:
FM stations followed by AM stations
After all stations are stored, the last preset
station will then be played
Manual programming
1 Tune to your desired station (see Tuning to
radio stations)
2 Press PROGRAM to activate programming
flashes
3 Press ALBUM/ PRESET to allocate a number
from 1 to 40 to this station.
4 Press PROGRAM to confirm
Display shows the preset number, waveband
and the frequency of the preset station
5 Repeat steps 1-4 to store other stations
You can erase a preset station by
storing another frequency in its place
To listen to a preset station
Press the ALBUM/ PRESET buttons once or
more until the desired preset station is displayed.
P001-P031_MCM276R_37_Eng 2006.7.26, 15:1423

Table of Contents

Related product manuals