English
25
USB
1 Check the USB device has been properly
connected. (See Installation: Connecting an
additional appliance)
2 Press SOURCE once or more to select USB
(or USB on the remote control)
➜ The icon appears
– NO AUDIO appears if no audio file is found in
the USB device
3 Play the USB’s audio files as you do with the
albums/tracks on a CD (See CD)
Note:
– For compatibility reasons, the album/track
information may differ from what it is displayed
through flash players’ music management software.
– File names or ID3 tags will be displayed as ---
if they are not in English.
P001-P031_MCM276R_37_Eng 2006.7.26, 15:1425
To Next Page
Loading...
