Philips Momentum 3000 - Remove Base Assembly for VESA Mounting

9
Height adjustment (27M1N3500L)
130mm
Pivot (27M1N3500L)
90°-90°
0°0°
Warning
• To avoid potential screen damage,
such as panel peeling, ensure that
the monitor does not tilt downward
by more than -5 degrees.
• Do not press the screen while
adjusting the angle of the monitor.
Grasp only the bezel.
2.3 Remove the Base Assembly
for VESA Mounting
Before you start disassembling the
monitor base, please follow the
instructions below to avoid any possible
damage or injury.
1. Place the monitor face down on
soft and smooth surface taking care
to avoid scratching or damaging the
screen.
27M1N3500L
27M1N3500LS
2. While keeping the release button
pressed, tilt the stand and slide it
out.
27M1N3500L
27M1N3500LS