Philips Momentum 5000 Series - Power Management Features; Energy Saving Modes

19
7. Power Management
If you have VESA DPM compliance display
card or software installed in your PC, the
monitor can automatically reduce its power
consumption when not in use� If an input
from a keyboard, mouse or other input
device is detected, the monitor will 'wake
up' automatically� The following table shows
the power consumption and signaling of this
automatic power saving feature:
PowerManagementDenition
VESA Mode Video H-sync V-sync
Power
Used
LED
Color
Active ON Yes Yes
45.1 W
(typ.)
74.9 W
(max.)
White
Sleep
(Standby
mode)
OFF No No 0.5 W (typ.)
White
(blink)
O mode OFF - - 0.3 W OFF
The following setup is used to measure power
consumption on this monitor�
• Native resolution: 2560 x 1440
• Contrast: 50%
• Brightness: 60%
• Color temperature: 6500k with full white
pattern
Note
This data is subject to change without notice�