Need help?Do you have a question about the Philips IntelliVue MP50 and is the answer not in the manual?
General| Resolution | 800 x 600 pixels |
|---|---|
| Touchscreen | Yes |
| SpO2 | Yes |
| Invasive Blood Pressure | Yes |
| Cardiac Output | Yes |
| Display Type | TFT LCD |
| Connectivity | USB, Serial ports |
| Monitoring Parameters | ECG, SpO2, Invasive Blood Pressure, Cardiac Output |
| Alarms | Configurable visual and audible alarms |
| Compatibility | Compatible with IntelliVue family |
| Operating Temperature | 10°C to 40°C (50°F to 104°F) |
| Display Size | 12.1 inches |
List of necessary tools for the upgrade process, including screwdrivers and anti-static equipment.
Verification table of upgrade kits, part numbers, and descriptions before installation.
Step-by-step guide on how to remove blank covers and I/O boards from the monitor.
Instructions for inserting specific I/O boards into the monitor's available slots.
Guide to safely separating the monitor's front and back halves for internal access.
Procedure for removing the main board from the monitor chassis, including battery board considerations.
Instructions for removing a specific blank cover using snaps and a screwdriver.
Procedure to separate the monitor's front and back halves for accessing internal components.
Steps to replace the battery door, especially if the warning symbol is missing.
To Next Page
