Philips MP3-CD - Controls; Controls on the System and Remote Control

10
English
Controls (illustrations on page 3)
Controls on the system and
remote control
1 STANDBY ON
– to switch the system on or to standby mode.
2 ECO POWER
– to switch the system on or to Eco Power
standby mode.
3 DISC 1/2/3 (CD DIRECT 1/2/3)
– to select a disc tray for playback.
4 Source selection – to select the following :
CD (CD 1•2•3)
– to select disc tray 1, 2 or 3.
TUNER (BAND)
– to select waveband : FM or MW.
TAPE (TAPE 1•2)
– to select tape deck 1 or 2.
AUX (VIDEO/CDR)
– to select the input for an additional appliance :
AUX or CDR.
5 Mode Selection
à á SEARCH• TUNING
for MP3-CD ............. to select previous/next
album.
for CD ......................... to search backward/forward.
for Tuner ..................... to tune to a lower or higher
radio frequency.
for Tape ....................... to rewind or fast forward.
for Clock .................... (on the system only) to set the
hour.
Ç STOP
for CD/ MP3-CD .. to stop playback or to clear a
programme.
for Tuner ..................... (on the system only) to stop
programming.
for Tape ....................... to stop playback or
recording.
for Demo ................... (on the system only) to
activate/deactivate the
demonstration.
for Clock .................... (on the system only) to exit
clock setting.
for Plug & Play ......... (on the system only) to exit
plug & play mode.
ÉÅ PLAY•PAUSE
for CD/ MP3-CD .. to start or interrupt
playback.
for Tape ....................... to start playback.
for Plug & Play ......... (on the system only) to initiate
and start plug & play mode.
í PREV / ë NEXT (- TITLE +)
for MP3-CD ............ to select previous/next title.
for CD ........................ to skip to the beginning of
the current, previous, or next
track.
for Tuner .................... to select a preset radio
station.
for Clock ................... (on the system only) to set
the minute.
6 DSC
– Selects different type of preset sound equaliser
settings. (OPTIMAL, JAZZ, ROCK or TECHNO)
7 VAC
– Selects different type of ambience-based
equaliser settings. (HALL, CONCERT or
CINEMA)
8 DBB/INC. SURR (DBB, IS)
– to select the desired bass boost level. (DBB 1,
DBB 2, DBB 3 or DBB OFF)
– to activate or deactivate the surround sound
effect.
9 MAX SOUND
– to activate or deactivate the optimal mix of
various sound features.
0 REPEAT
– to playback track(s)/disc(s)/programme
repeatedly.
! SHUFFLE
–Turns on/off the random play mode.