1 Rinse the nose trimmer head with hot water.
2 Turn on the appliance and rinse the nose
trimmer head once more to remove any
remaining hairs. Then turn off the appliance
again.
For a thorough clean, immerse the nose trimmer
head in a bowl with warm water for a few minutes
and then turn on the appliance to remove
stubborn hair/debris.
3 Carefully shake off excess water and let all parts
air dry completely.
Cleaning the precision shaver
1 Hold the precision shaver at the grooves on
each side and pull the top part off the bottom
part.
2 Blow and/or shake out any hair that has
accumulated inside the precision shaver.
Do not use the cleaning brush to remove hairs
from the shaving foil.
3 Clean the top part of the precision shaver under
a warm tap.
4 Carefully shake off excess water and let all parts
air dry completely.
5 Reattach the top part onto the bottom part of
the precision shaver.
Storage
- Store the appliance in the pouch supplied.
Note: Make sure the appliance is dry before you
store it in the pouch.
17
English
To Next Page
Loading...
