14
English
Charging with the power cord
1 Make sure the product is turned off.
2 Insert the small plug into the appliance and
put the power cord in the power outlet.
The display of the shaver indicates that the
shaver is charging.
3 After charging, remove the power cord from
the power outlet and pull the small plug out
of the appliance.
Using the appliance
Warning: Always check the appliance before
you use it. Do not use the appliance if it is
damaged, as this may cause injury. Always
replace a damaged part with one of the
original type.
Note: The appliance can only be used without
cord.
Turning the shaver on and off
-
To switch on the shaver, press the on/off
button once.
-
To switch off the shaver, press the on/off
button once.
After switching the shaver off, the display
lights up for a few seconds and shows the
remaining battery.
To Next Page
Loading...
