20
English
1 Switch on the appliance.
2 Slowly move the trimming head along the rim
of the ear to remove hairs that stick out
beyond the rim.
3 Carefully insert the trimming head into the
outer ear channel.
Do not insert the trimming head more than
0.5cm into your ear channel, as this could
damage the eardrum.
4 Slowly turn the trimming head around to
remove all unwanted hairs from your outer ear
channel.
5 Switch off the appliance and clean the
attachment after use.
Cleaning and maintenance
Cleaning the shaver
Clean the shaver after every use for optimal
performance (see 'Cleaning and maintenance').
Note: While rinsing shaving heads, water may
drip out of the base of shaver. This is a normal
occurrence. Internal electric parts are in a
waterproof compartment so the shaver will be
protected against water damage.
Caution: Always check if the water is too hot,
to prevent burning your hands.
1 Switch on the shaver.
To Next Page
Loading...
