LRM2070, LRM2080, LRM2090 Datasheet
OccuSwitch DALI sensor/controller
12/15
Mode Application Occupancy Smart timer Background period Daylight override Daylight dependent Daylight dependent Parallel link period
(minutes) (minutes) regulation switching (Advanced only)
1 Cell office (default) Auto ON/OFF 10 0 Window only Window / corridor Window only Local occupancy
2 Open plan office Auto ON/OFF 10 120 Window only Window / corridor Window only Local occupancy
3 Class room Manual ON/auto OFF 10 0 N.a. Window / corridor Window / corridor Local occupancy
4 Cell office* Disabled 10 0 N.a. Window / corridor Window only N.a.
5 Open plan* Disabled 10 0 N.a. Window / corridor Window only N.a.
6 Corridor Auto ON/OFF 10 60 Window / corridor Window / corridor Window / corridor Local occupancy
7 Toilets Auto ON/OFF 0 15 Disabled Disabled Disabled Local occupancy
8 Meeting room Manual ON/auto OFF 10 0 Disabled Window / corridor Window only Local occupancy
9 Open plan office** Auto ON/OFF 10 Infinite Window only Window / corridor Window only Background lighting
10 Custom N.a. N.a. N.a. N.a. N.a. N.a. N.a.
* Equals mode 1 and 2, but without MD active. Do not use these modes for normal applications.
** This mode works differently for the advanced (LRM2080) and network (LRM2090) OSD when compared with OSD basic (LRM2070). For LRM2080 & LRM2090 the lights will switch off (the basic never switches off) when
none of the advanced OccuSwitch DALI units in the parallel network detect movement. If one or more do detect movement, all other units will go to background level.
To Next Page
Loading...