Philips On Ear 4000 Series - Use your headset; Connect the headset to your Bluetooth device; Manage your calls and music

4 Use your
headset
Connect the headset to your
Bluetooth device
Turn on your mobile phone/ Bluetooth
device.
Press and hold the on/off button for 2
seconds to turn heaphones on.
The white LED will turn on .
The headphones are reconnected to
the last connected mobile phone/
Bluetooth device automatically.
Tip
 If you turn on the mobile phone/Bluetooth device or
activate the Bluetooth feature after turning on the
headphones, you have to reconnect the headphones
and mobile phone/ Bluetooth device manually.
 If the headphones fail to connect to last connected
Bluetooth device within range in 5 minutes, it will
change to pairing mode, then will switch off
automatically if it’s still not connected to any
Bluetooth device 5 minutes later.
 If the headphone has no any connection history and
doesn’t connect any Bluetooth device whith 5
minutes, it will switch off automatically.
Note
Manage your calls and music
On/off
Task
Button
Operation
Turn the
headphones
on.
On/off
Press and hold for
2 seconds.
Turn the
headphones
off.
On/off
Press and hold for
3 seconds.
The white
LED is on
and fades
out.
Music control
Task
Button
Operation
music/call
control
Play or pause
music.
Press once.
Press to +/-
Press to +
Adjust volume.
Next track.
Previous track.
Call control
Task
Button
Operation
Pick up/ hang
up a call.
Switch caller
during a call.
music/
call control
music/-
call
control
Press once.
twice.
Press to -
twice.
Press and
hold for 2
seconds.