19EN
» The CHR indicator turns on (green).
2 To switch off, slide •ON OFF• to the OFF position on the main unit.
• Alternatively, press on the remote control to switch to standby mode.
» The CHR indicator turns on (red).The battery charging starts.
» When the battery is fully charged, the CHR indicator turns off.
Auto standby
In DVB-T mode or USB mode, if there is no button press or media play on the
playerfor three hours, the player switches to standby mode to save power.
In the DVB-T mode, press SETUP. Go to [Time] > [Auto Standby]. Press
/
to select [On].
Select OSD language
You can select a different language for the onscreen menus.
In DVD mode
1 Press SETUP.
» The setup menu is displayed.
2 Go to [Language] > [Language], then press OK/ .
3 Press / to select a language.
4 Press OK/ to conrm.
5 Press SETUP to exit.
PD9015_12_UM_Book1_V2.0.indb 19 10/31/2012 5:04:23 PM
To Next Page
Loading...
