Philips PD9015 - Page 34

35EN
System
[Parental Guidance]
you can set password to programs with age restrictions.
• Enter your password to select an age level (000000 by default).
[Set Password]
Set or change the password that you use in [Program Edit], [Parental Guidance]
and [Restore Factory Default].
Tip
• If you forget your last saved password, you can enter 888888 to unlock. Then, you can enter a new
password.
[Restore Factory Default]
You can reset your player settings to the original factory settings.
• Enter your password (000000 by default).
[Information]
check the information about your player. Before you upgrade the rmware, check
current version information of your player.
[Software Update]
You can update the rmware through a storage device.
1 On your computer, do the following:
a Go to www.philips.com/support to nd the latest rmware.
b Search for your model and click on "Software and drivers".
c Download the rmware update and save the le to the root
directory of a USB storage device.
2 On the player, do the following:
a Connect the USB storage device.
b On the remote control, press SETUP, select[System]>[Software
Update]>[USB Upgrade].
» If a rmware update is detected, you are prompted to start the
update.
English
PD9015_12_UM_Book1_V2.0.indb 35 10/31/2012 5:04:28 PM