Philips PerfectCare 6000 Series - Introduction; Important Information and Safety Warnings; General Safety Precautions; Danger and Warning Statements

Published by Philips Domestic Appliances Page 4 of 34 For internal use only
Document No. : CSW-07-081-21362
Important Repair Instructions (Continue)
5. Self-Check mode
Self-Check mode is NOT an exhaustive diagnosis, but a quick preliminary check on all the hardware function.
5.1 The following to be carried out before Self-Check mode:
i) Power meter should be in-placed to monitor system power.
ii)Make sure Soleplate is <100°C
iii)Place Soleplate in the Horizontal Position (0 + 1°)
5.2 Reset product to Factory Mode Test (FMT) Flow