19
2 Place the Calc-Clean container on the
ironing board or any other even, stable
surface.
3 Place the iron stably on the Calc-Clean
container.
4 Press and hold the CALC-CLEAN button for
2 seconds until you hear short beeps.
Note: The Calc-Clean container has been
designed to collect scale particles and
hot water during the Calc-Clean process.
It is perfectly safe to rest the iron on this
container during the entire process.
5 During the Calc-Clean process, you hear
short beeps and a pumping sound.
Note: Hot water and steam come out from the
soleplate during Calc-Clean process.
6 Wait approximately 2 minutes for the
appliance to complete the process. When
the Calc-Clean process is completed, the
iron stops beeping and the CALC-CLEAN
light stops ashing.
2 sec.
2 min.
To Next Page
Loading...
