Philips PerfectCare Compact Plus GC7929 - Page 22

22
ENGLISH
Problem Possible cause Solution
The iron does
not produce any
steam.
There is not enough
water in the water
tank.
Fill the water tank.
Press and hold the
steam trigger until
steam comes out. It
may take up to 30
seconds until steam
comes out.
You did not press the
steam trigger.
Press and hold the
steam trigger until
steam comes out.
The steam function
has been disabled
until you have
performed the Calc-
Clean process.
Perform the Calc-
Clean process to
restore the steam
function. (see chapter
‘Cleaning and
maintenance’)
At the start of your
ironing session, the
steam trigger has not
been pressed long
enough.
Press and hold the
steam trigger until
steam comes out. It
may take up to 30
seconds until steam
comes out.
No steam
comes out of
the soleplate,
the light of
the CALC-
CLEAN button
ashes and the
appliance beeps.
You have not done or
have not completed
the Calc-Clean
process.
Perform the Calc-
Clean process to
enable the steam
function again (see
chapter ‘Cleaning and
maintenance’).