Switch TV channels
Press CH +/- on the remote control.
Press the Numeric buttons to enter a
channel number.
Manage favourite channels
You can view all channels or only a list of
your favourite channels.
Create a list of your favourite channels
1. Press LIST.
The channel list is displayed.
2. Select the channel to mark as favourite,
then press OPTIONS.
3. Select [Add/remove favourites], then
press OK.
The selected channel is marked with an
asterisk.
To remove a channel from the favourites list,
select [Add/remove favourites], then press
OK.
Display your list of favourite channels
1. Press LIST, then press OPTIONS.
2. Select [List] > [Favourites] to display
channels in the favourite list.
3. Press OK to confirm.
Reorder your list of favorite channels
1. While your list of favorite channels is
displayed, press OPTIONS.
2. Select [Reorder], then press OK.
3. Select the channel to reorder, then press
OK.
4. Press the Navigation buttons to move the
highlighted channel to another location, then
press OK.
5. Once complete, press OPTIONS.
6. Select [Exit reorder], then press OK.
Manage channel lists
After the channels are installed, you can:
Filter channels.
Switch between antenna and cable
channels.
Rename channels.
Lock a channel.
Listen to digital radio.
Filter channels
1. While you watch TV, press LIST.
2. Press OPTIONS, then select [Filter].
3. Select an option, then press OK.
[Digital + Analogue]: Display all
channels in the channels list.
[Digital TV channels]: Display only
digital channels.
[Analogue Channels]: Display only
analogue channels.
[Free + scrambled]: Display all channels
in the channels list.
[Free channels]: Display only free
channels.
[Scrambled channels]: Display only
scrambled channels.
Note: The filtering options may vary
according to your broadcaster.
Switch between antenna and cable channels
You can switch between antenna and cable
channels while you are watching TV.
1. While you watch TV, press .
2. Select [Setup] > [Channel settings] >
[Channel installation] > [Antenna
connection].
3. Select [Antenna (DVB-T)] to watch
antenna channels or [Cable (DVB-C)] to
watch cable channels, then press OK.
Rename channels
When you select a channel, its name
appears. You can change this channel name.
1. While you watch TV, press LIST.
The channel list is displayed.
2. Select the channel to rename, then press
OPTIONS.